02-05-2005, 12:07 PM
Quote:Support of Unbuffered DDR DIMM Sizes (according to the GA-8PE800(-L) motherboard manual):
64 MBit (2Mx8x4 banks)
64 MBit (1Mx16x4 banks)
128 MBit (4Mx8x4 banks)
128 MBit (2Mx16x4 banks)
256 MBit (8Mx8x4 banks)
256 MBit (4Mx16x4 banks)
512 MBit (16Mx8x4 banks)
512 MBit (8Mx16x4 banks)
Total System Memory: 2 GB max.
It may be indeed that your motherboard doesn't support the new architecture of the modules. Has the kingston chip you tested this kind of architecture? look if there are chips on both sides of the module, or if there are only onesided. count how many chips there are on either side. If the count differs from the specification on your manual, they may be incompatible. If it is so, try buying a module that has the same chip size as your current infineon module, or try using another infineon module.
As for the Bios setting, I would recommend setting a frequency to force the modules to work at that setting. Your motherboard may not be able to read the SPD data correctly.